M1075
Active member
- 3,589
- 7
- 38
- Location
- Oklahoma City
Life is full of little bumps in the road. Sometimes the axle goes snap. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Axle Carnage!
- Thread starter M1075
- Start date
bomar76
New member
- 355
- 0
- 0
- Location
- Marysville OH
That's gonna leave a mark!!!
h1crwchf
New member
- 94
- 0
- 0
- Location
- Stafford Virginia
WOW
I have seen damage like that before but only when I have pickled it from a very high altitude!! good luck!
I have seen damage like that before but only when I have pickled it from a very high altitude!! good luck!
- 34,010
- 1,823
- 113
- Location
- GA Mountains
M1075, what's your plans for fixing it? Here's a new M821 front axle out west. I'm pretty sure you can remove the spacers that make it a bit wider. Price is right though. http://www.partsmen.com/m821frt.html
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
wow I would never have thought that would happin.
M1075
Active member
- 3,589
- 7
- 38
- Location
- Oklahoma City
Kenny-
Thanks for the lead. I have found a front axle off a 900 series that I plan to use. Do I just switch the hubs?
Thanks for the lead. I have found a front axle off a 900 series that I plan to use. Do I just switch the hubs?
M1075
Active member
- 3,589
- 7
- 38
- Location
- Oklahoma City
It was a little surprising to me to see it break off like that. There was no weight (feeder was empty) and the terrain wasn't that severe. Just a little too much speed.
M1075
Active member
- 3,589
- 7
- 38
- Location
- Oklahoma City
Bomar-
The mark is on my nose and the cut between the eyes, but I thought I would spare everyone the pic!
The mark is on my nose and the cut between the eyes, but I thought I would spare everyone the pic!
- 475
- 243
- 43
- Location
- Qualicum Beach BC
glad to hear you're ok after that.kinda makes me think twice about combining m35 axles and 16r20's...all that extra weight might not be a good thing.and ummm...just how fast were you going?
thats one heck of a faliure with no load.
is there any indication of previous damage or an old crack?
it totally blows my mind that it could just shear off like that.
you'd think they would've engineered it to deform before suffering a catastrophic faliure.
thats one heck of a faliure with no load.
is there any indication of previous damage or an old crack?
it totally blows my mind that it could just shear off like that.
you'd think they would've engineered it to deform before suffering a catastrophic faliure.
- 10,350
- 92
- 48
- Location
- Meadows of Dan, Virginia
Man, that's a clean break!
When the axle housing failed, then the axle took the whole load and it's not designed to carry any load except for turning/twisting, I guess.
The axle housing supports the load. It must have had some defect if the speed wasn't excessive.
Perhaps the housing was already cracked...
Images of the M923 series front axle below.
Bjorn
When the axle housing failed, then the axle took the whole load and it's not designed to carry any load except for turning/twisting, I guess.
The axle housing supports the load. It must have had some defect if the speed wasn't excessive.
Perhaps the housing was already cracked...
Images of the M923 series front axle below.
Bjorn
Attachments
- 34,010
- 1,823
- 113
- Location
- GA Mountains
M1075, you can just swap out the brakes. Hold on to that air stuff though. One day you might want to switch to air and the 5 ton is much more cost effective to swith than a decue.
m.walker
Member
- 788
- 5
- 18
- Location
- Independence,Mo.
wow!!!
As long as your ok you can always fix the truck! I heard the air brake front axles are worth big bucks, if you didn't fix it yet I've got a 5 ton front end , we could do some trading on (tires,wheels ?)PM me . I'm going out of town but I'll be back sat. (maybe) . The break has some dark spots that look like it was already cracked or weak there , as opposed to the shiny areas. mark
As long as your ok you can always fix the truck! I heard the air brake front axles are worth big bucks, if you didn't fix it yet I've got a 5 ton front end , we could do some trading on (tires,wheels ?)PM me . I'm going out of town but I'll be back sat. (maybe) . The break has some dark spots that look like it was already cracked or weak there , as opposed to the shiny areas. mark
ProJunkRacing
New member
- 35
- 0
- 0
wow that is just crazy i mean how the heck can you do that
M1075
Active member
- 3,589
- 7
- 38
- Location
- Oklahoma City
Well, I learned a few lessons on this one. I have confirmed what I always thought, "I need a wrecker!". I should have bought Bruce's 900 when I had the chance. It was a real chore dragging the truck home with a loader. I hope to get a new axle this weekend and get to work on an install.
DrFoster
New member
- 423
- 0
- 0
- Location
- Cheyenne, WY & Condado, PR
Damn, looks like warranty work... LOL!!!