• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Axle Gear Oil

GREENMV

New member
Steel Soldiers Supporter
325
5
0
Location
Linden, TN
I searched the Forums and am lost on this question. I am going to replace leaking right rear seal in my M1009. I know the TM shows adding 80/90 would It hurt to add a heavier weight oil? Is there any recommendations? I have no idea on this subject.
 

flighht2k5

Banned
322
5
0
1009's have a locker? I thought the 08's only had them. If your talking about the gov bomb gm made. It shouldn't need an additive. It's not a LSD. Lockers don't require special additives.
 

Westech

CPL
6,104
206
63
Location
cow farts, Wisconsin
its a clutch pack locker... thats the type you NEED the stuff in. In most cases if it was used before you really dont need it because it has soaked in to the packs... but if it has been flushed a few times use it. Cant hurt it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks