BFR Metals, Salina Kansas, a Goodie Hole

[overmanjh]

Man I haven't been to that place in about 8-10 years, they have some really cool old stuff though. Wish I had a good bone yard like that close to me now.

 

[tuckered]

How much for the m16 mounts? Also I need 2sets of seatbelts with the retractors and hardware from floor to seat. Thanks glen, don't woek to hard out there!!

I need some for my deer stand and Polaris Ranger too!

 

[91W350]

Several 105 tailgates to choose from, knock yourself out! I am thinking the gun mounts would be a nice addition to the Utica. I gave up on the bed, so if anybody needs parts....

You must be talking about Hronek Salvage. BFR is only about a year old. I was buying military trucks for them before the business was opened.....back in the old police department days. 27 year of law enforcement. I used to arrest people for stealing things, now I buy stolen things, not knowingly of course, but it happens. We bought out Hronek Salvage. Glen

 

[overmanjh]

Ya, that sounds right, I haven't been out that way since I left Ft. Riley in 04, the location sounded right.

 

[dragonman]

Im heading down that way tonight will stop by tomorrow and see what you have on hand.
i could use a cucv hood, five ton air cleaner.

 

[91W350]

I have a CUCV, never paid much attention to the hood.

We have four new M813s in today with no engines. One has a really nice soft top and another has a really nice hardtop. Other than that, there is not much to brag about. Some really nice doors and windshields.

I think we are in good shape for your air cleaner.

 

[dragonman]

Ok sounds good.

 

[davesgmc]

any good 800 series hoods there yet?

 

[91W350]

Sorry Dave, it is the second thing I check following winch and pto....

 

[davey8943]

Glenn,

I recently purchased an M939 series truck with a busted transfer case (split wide open!). You had mentioned you would sell one a couple weeks ago.

Any chance you had one stashed when they came to clean you guys out?

As I get further into this truck I notice a few more things that I may need -- hard / soft top, protective control box, power steering pump pulley, etc. Any chance on those either?

Thanks,
Dave

 

[91W350]

I have two T cases pulled, one was set aside for you. The other stuff should be no problem. That is a nasty looking break!

 

[indy4x4fab]

Glenn,

I recently purchased an M939 series truck with a busted transfer case (split wide open!). You had mentioned you would sell one a couple weeks ago.

Any chance you had one stashed when they came to clean you guys out?

As I get further into this truck I notice a few more things that I may need -- hard / soft top, protective control box, power steering pump pulley, etc. Any chance on those either?

Thanks,
Dave

You may want to drain the diffs, to make sure that teeth didn't sheer with that kinda shock load hit.

 

[91W350]

This week's arrivals included some medical boxes, rifle racks, eight 813s and two 820s. I think I may finally have a decent hood for Elmo....

 

[davey8943]

I have two T cases pulled, one was set aside for you. The other stuff should be no problem. That is a nasty looking break!

I know you hadn't wanted to pull and ship the case, Thanks for hanging onto this one for me!



Any chance (since its already pulled) I can talk you into strapping it on a pallet for pickup by a shipper? I would absolutely love to make a trip and spend a few hours playing at the "toy store", but I'm sure the shipping would cost much less than I would spend in fuel to get there!

Interested in shipping the other stuff I mentioned above with the T Case? I'd be happy to make all the arrangements with the shipper!

Thanks,
Dave

 

[91W350]

Control box, power steering pulley no problem. Out of hardtops now, I crated one and will not be doing that again. They are not easily packaged, odd sized and somewhat fragile.

 

[quickfarms]

Glen

Have you had a chance to strap the M146 parts to a pallet for me?

 

[phil2968]

Happy Birthday Glen!

 

[davesgmc]

This week's arrivals included some medical boxes, rifle racks, eight 813s and two 820s. I think I may finally have a decent hood for Elmo....

I believe we will be out on wed. see you then!

 

[davey8943]

Control box, power steering pulley no problem. Out of hardtops now, I crated one and will not be doing that again. They are not easily packaged, odd sized and somewhat fragile.

I can imagine the hard tops not packaging very well at all!

My immediate need is for the transfer case and control box. Will they package?

Thanks,
Dave

 

[indy4x4fab]

I can imagine the hard tops not packaging very well at all!

My immediate need is for the transfer case and control box. Will they package?

Thanks,
Dave

Hay dave me and sparky are planning a trip out there this spring, you are more then welcome to tag along for the ride out and back, just a thought.