• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Blink when it shouldn't

sermis

Active member
1,844
17
38
Location
Temple, TX
Came home and saw the right blinker flashing. First thought was someone messing with the truck. Checked and the turn signal leave was in the center so it shouldn't be blinking. Yes 3 leaver switch was one click right.
Any idea?


Sent from my SM-G920V using Tapatalk
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
5,885
8,197
113
Location
Papalote, TX
Curious, what happens when you cycle the turn signal switch through its left, right and 4 way?
looks like simply a defective turn signal switch.
 

papakb

Well-known member
2,288
1,185
113
Location
San Jose, Ca
If you open up the turn signal switch you'll see a number of contacts that are actuated by a cam on the arm pivot. They can get bent and cause the problem you're seeing in which case you can bend them back with a pair of needlenose pliers. You might also find the switch got wet and has corroded internally. Open it up and post a picture if you do.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks