• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Bobbed spring height question

jeli

Member
414
1
18
Location
Stillwater, MN
I'm new here. After about a year of thinking what type of vehicle I want to get for a hobby I landed on the deuce. I've been in the Army Reserves for 22 years so far. Never really messed with them. Always drove 5 tons and larger. I've always liked to be a little different and an MV gives me that. Right now I'm mulling over many different options. Not sure how stock or not to go. TBD.

My question is for those who've bobbed a deuce. What is the distance from the top of the rear axle to the bottom of the frame and the distance between the spring eyes? I know trailer springs are a good solution but I always have my eyes open for alternatives. I have a line on a set of almost new medium truck springs and mounts. If the stack height and arch get me close I might grab them.

Thanx
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks