- 71
- 39
- 18
- Location
- dothan,al.
Need bolt size for 2 bolts that hold 2 brackets on floor for front bulkhead?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Bolt size
- Thread starter jward1
- Start date
- 15,981
- 22,381
- 113
- Location
- Burgkunstadt, Germany
You got a part number? NSN?
- 10,186
- 5,919
- 113
- Location
- Camp Wood/LC, TX
1/2” UNC x 1,25” lg maybe.
- 661
- 924
- 93
- Location
- Southern Minnesota
Is this the 2-man or 4-man bulkhead?
Appears to be in the parts manual - this is the front (2-man) bulkhead, which I believe matches your picture - See TM-92320-280-24P-1.
Look for Figure 209 - Cargo Bulkhead and Mounting Hardware. Bracket is #11.. the bolt into the floor is #15, with #14 and 13.. while the other side of the bracket is a bolt that goes up to a cargo hook and then washers/nut.. This is the front (2-man) bulkhead, which I believe matches your picture.
The one that goes into the floor should already have a threaded insert into the floor (or at least did in my experience).
#15 - SCREW,CAP,HEXAGON H 1/2-13 X 1.50
#14 - WASHER, LOCK 1/2
#13 - WASHER, FLAT 1/2
Appears to be in the parts manual - this is the front (2-man) bulkhead, which I believe matches your picture - See TM-92320-280-24P-1.
Look for Figure 209 - Cargo Bulkhead and Mounting Hardware. Bracket is #11.. the bolt into the floor is #15, with #14 and 13.. while the other side of the bracket is a bolt that goes up to a cargo hook and then washers/nut.. This is the front (2-man) bulkhead, which I believe matches your picture.
The one that goes into the floor should already have a threaded insert into the floor (or at least did in my experience).
#15 - SCREW,CAP,HEXAGON H 1/2-13 X 1.50
#14 - WASHER, LOCK 1/2
#13 - WASHER, FLAT 1/2