Cable Needed

[Armada]

I'm in need of a cx-4723 cable, min. 10' length. It connects the vic-1 control to an rt524 radio. Anybody got an extra? Thanks

 

[Armada]

Still need one. This is what it looks like, except this one is a 20 footer.
I need a 10 or 12 foot.

 

[cranetruck]

Try

http://fairradio.com/

 

[Recovry4x4]

There's one out in the yard under a tree. I'll measure it tomorrow and see if its still serviceable

 

[Armada]

Really?! The one's that grow out in the wild are the best kind!
Thanks Kenny, let me know what you come up with.

 

[Armada]

Kenny, any luck with the cable?

 

[Recovry4x4]

OK, just ran out to the tree and collected up the cable. Looks decent but is only a 6 footer. Yours if you can used it.

 

[Armada]

Too short for the CUCV, but will work for the duece. PM sent

 

[Recovry4x4]

Cable went out this morning Paul USPS Priority. Should see it in a few days.

 

[Armada]

Awesome. Thank you Kenny!

 

[CCATLETT1984]

here is a link for a CX-4722A 12ft cable on ebay

http://cgi.ebay.com/US-military-rad...979QQihZ007QQcategoryZ588QQrdZ1QQcmdZViewItem


not sure if its the same cable or not

 

[ONTOS66]

No, the CX-4722 is not the same as the cx-4723. Here is a quick guide to the functions of most of the cables used with the VRC-12
family of radios:

CG-1773 [RF] connects RT to antenna, Aux. Rec. to antenna or Aux. Rec. to Aux Rec.
CX-4720 [power] connects from the vehicle battery to MT-1029
CX-4721 [power] connects mount to mount (MT-1029 or MT-189 to (MT-1029 or MT-189
CX-4722 [control] connects the radio to the antenna matching unit control jack
CX-4723 [control/audio] connects the various mounts (MT-1029, MT-1898, etc.) to various control units (C-2297, C-2298, etc.)