• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Casters on an 831a

69birdman

Active member
201
139
43
Location
Summerfield, Fla.
Has anyone tried bolting a 1/2" stem caster directly to the 4 corners of the skids on a 831a?
I'd think with 4 or 5" wheels would allow it to roll on solid ground.
 

kloppk

Well-known member
Steel Soldiers Supporter
1,934
2,988
113
Location
Pepperell, Massachusetts
I have 3" casters on both of my 831A's. Picked them up at Harbor Fright.
They work very well for moving them about the garage & driveway.

831A Casters.jpg
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
My try this place.

Casters & Wheels | Caster City
https://castercity.com/m//default.htm

I don't think any hard caster will go in dirt unless its pneumatic and 8" tall more like 10.
Here's a couple pictures of what I did works good on concrete if I go dirtI roll and on 3/4" hard plywood.


Sent from my SM-G975U using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks