• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Complete 6.2 with Turbo Kit

Status
Not open for further replies.

Southern Off Road

New member
28
0
0
Location
Aiken,S.C.
I have a complete 6.2 motor from head to toe. I have recently bought a Borg Warner T3 that was for an 6.5, a new electric fuel pump, 6.5 exhaust manifolds, Flowmaster crossover pipe (modified and tucked),complete exhaust from turbo back(runs outside of frame custom made wrapped in dei heat wrap), 6.5 Intake and Plenium,S&B air box, 6.5 Engine cover, flex plate, torque convertrer, new glow plugs. The Motor has 43,xxx miles, i put the turbo kit on less then 6 Months ago and the ip pump has went out i believe cause its surging for fuel. Now it want crank and it spends freely but want crank. It makes a clunk sound. I have invested alot of money in this truck and am tired of stuff going wrong. I am pulling the motor and putting in a sbc crate motor, something i know. Selling motor as is $2000obo. Will be pulling motor out Saturday
 

Attachments

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,775
227
63
Location
OKC, OK
In my opinion this is an acceptable thread.

The Title says nothing about "for sale" or "wanted"

He talks about his truck/engine.

And as a side note he says it is for sale.

Doghead has advised many people to do it this way. The old rules allowed this but the new rules don't address it.

Time to call in the refs
 

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,486
113
Location
mid- michigan
In my opinion this is an acceptable thread.

The Title says nothing about "for sale" or "wanted"

He talks about his truck/engine.

And as a side note he says it is for sale.

Doghead has advised many people to do it this way. The old rules allowed this but the new rules don't address it.

Time to call in the refs
Maybe it wouldn't look like a classified ad if he titled it installing SBC in my truck , instead of listing the parts that are for sale in the title.
 

patracy

Administrator
Staff member
Administrator
14,596
4,654
113
Location
Buchanan, GA
In my opinion this is an acceptable thread.

The Title says nothing about "for sale" or "wanted"

He talks about his truck/engine.

And as a side note he says it is for sale.

Doghead has advised many people to do it this way. The old rules allowed this but the new rules don't address it.

Time to call in the refs
No it's not acceptable to advertise something for sale in the open forums. If it had been something along the lines of the OP starting a thread about an engine swap. Then mentioned that he would sell the engine, that would be acceptable. But this reads like a classified.
 
Status
Not open for further replies.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks