• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Converting pto driven equipment to hydraulic and the decent into madness!!

davidb56

Well-known member
1,020
1,237
113
Location
Bonners Ferry Idaho
D
Came across this and seems to be an interesting setup
Description:
GARWOOD / HOLAN M818 135 HYDRAULIC WINCH FROM A FORD C800. THE HYDRAULIC WINCH IS FROM THE M800 SERIES AND COMES WITH THE DRIVE PUMP. OVERALL DIMENSIONS MEASURES AT 68 1/2 INCHES LONG BY 20 3/4 INCHES TALL, BY 19 INCHES WIDE. THE DRUM LENGTH IS 17 3/4 INCHES, DRUM DIAMETER IS 8 INCHES, AND THE SPOOL WIRE MEASURES 1/2 INCH THICK.
View attachment 790960View attachment 790961View attachment 790962View attachment 790959View attachment 790958View attachment 790957
Does it come with another axle to support it? hahahahaha
 

gentrysgarage

Active member
553
118
43
Location
Lost Angels, CA
HiYa davidb56,
Yep such a HEAVY geartrain, but of note is how the other guy overcame a deficiency/need with that geartrain! Probably needed the extra weight also LOL!
RustyStud was the first I remember that advocated for an electric on the front of his deuce, I sorta fell into it, as I got the HMMWV electric winch for the gin pole project...then learned that even the manufacturer stipulated in rather
LARGE and BOLD letters NOT TO BE USED FOR LIFTING! So I ended up with an electric winch that I will mount up front like the 2 of you guys!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks