Correct cables for VIC-1 with RT-1439

[CanonNinja]

As I see it laid out, looks like the installation is fairly straight forward. However, I cant remember for the life of me, which cables are used on the VIC-1.


But the main question I have here is the hookup between the radio and amp. It looks like a 2-part connection, being a cable from the amp, and one "box" that plugs in between that cable and the radio mount itself. For those of you guys with RT-1439s, how did you wire them up?

 

[86humv]

From the radio mounting base attach CX-13313/VRC vic interface to J3, and out of interface, connect a CX-13300/vrc cable to J501 on AM-1780/vrc amp.

 

[CanonNinja]

finding the CX-13300 has been impossible so far. I have a 13313 already.

 

[86humv]

I'll check to see if i have an extra.

 

[wsucougarx]

I bought some from beltfed guy on ebay. You can use the CX-13300 or the CX-4723. The CX-13300 just has an angle to the plug. They are both 18 pin connectors.

 

[CanonNinja]

thanks bud!

 

[cranetruck]

I find this diagram rather useful...

 

[CanonNinja]

Bjorn, thats what I originally had, but the TMs i found online say differently for the RT-1439


http://www.liberatedmanuals.com/TB-11-5820-890-20-105.pdf page 5.4

 

[cranetruck]

Bjorn, thats what I originally had, but the TMs i found online say differently for the RT-1439


http://www.liberatedmanuals.com/TB-11-5820-890-20-105.pdf page 5.4

Too new for me (SINCARS), if it wasn't used during the '60-'70s, I probably don't have any info or parts for it.