Corrected wiring diagrams CUCV (All Except M1010)

[amphi]

The diagrams, as published in the Technical Manuals, are missing some wire traces for the Gen 1 charging circuit and two indicator lights (4wd and Oil) in the dash cluster.

There has been some discussion about how the Gen-1 charging circuit gets power from the heater blower fuse. This is true as shown by dependable in his post here:

http://www.steelsoldiers.com/cucv/62413-batteries-dying-my-cucv-2.html#post761013

Thank you dependable for taking the time to trace this out.

The attached diagrams show the missing traces (brown wires)

Hope this helps
Gary

 

[Warthog]

Thanks Amphi for posting the diagrams.

When I took the dash wiring harness out of a M1009 for BARRMAN, I traced every single wire and corrected my diagrams. I have posted them a couple of times.

Another item that isn't shown is the fact that all of the ground wires for the instrument cluster go back to the plug above the emergency brake. Part of that is shown but not all of it.

Warthog

 

[steelandcanvas]

Gary thanks for the corrected drawings. They will go in a file for future reference.