pbearly
Member
- 11
- 22
- 13
- Location
- Almont, MI
Does anyone have a source for the four plastic clips that hold the grille trim on? I haven't been able to find them. I found everything else.
Thank you
Thank you
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV Grille Trip Plastic Clips
- Thread starter pbearly
- Start date
2INSANE
Well-known member
- 722
- 819
- 93
- Location
- Belgrade, Montana
Pic of what u need? Not sure which plastic clips u are talking about.
Barrman
Well-known member
- 5,168
- 1,587
- 113
- Location
- Giddings, Texas
You mean #7?
www.lmctruck.com
Grille Molding
Shop from thousands of parts and accessories to help you restore, maintain, and customize your Chevrolet, GMC, Dodge or Ford truck or SUV. Keep 'em on the road with the right part, right price, right now.
cucvrus
Well-known member
- 11,285
- 9,647
- 113
- Location
- Jonestown Pennsylvania
I know exactly what you are talking about. The early 1984 models had this style plastic clip. I convert to the 1985 and never outer headlamp trim moulding tinnerman nut style. But I have used a wedge clip in the past. the plastic ones were available from GM at one time of course they have long since been discontinued. It is the same plastic clip they used on several mouldings of the GM line back then. Good Luck. Getting the 4 stud moulding clips tight also works and keeps the outer trim tight.
2INSANE
Well-known member
- 722
- 819
- 93
- Location
- Belgrade, Montana
They Metal right?
Attachments
pbearly
Member
- 11
- 22
- 13
- Location
- Almont, MI
Here is a pic of the clips
Attachments
cucvrus
Well-known member
- 11,285
- 9,647
- 113
- Location
- Jonestown Pennsylvania
I have not been able to buy them in years. But I am sure an autobody supply shop could get something. I can ask my friends.
cucvrus
Well-known member
- 11,285
- 9,647
- 113
- Location
- Jonestown Pennsylvania
Is this a 1983/1984 build date?
pbearly
Member
- 11
- 22
- 13
- Location
- Almont, MI
It is titled as an 84 so I'd say it is.
cucvrus
Well-known member
- 11,285
- 9,647
- 113
- Location
- Jonestown Pennsylvania
Check out this company. auveco.com
There are several clips that would work on that application. I may have a few originals but it may take me light years to locate them. I would use something like the top one I listed. It just needs to cam on the stud and hold the moulding tight. Never see it after the headlamp bezel is installed. Either that or use the tried and true 1985 outer mouldings with the speed nuts on tinnerman nuts on them.
Here's a GM PDF file. Maybe. Happy Holidays and Good Luck.
The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten