CUCV Parts needed

[twright]

I picked up my M1031 At Redstone yesterday some one had removed the main terminal blocks also the rear drive shaft was bent( fork lift ) I am looking for a draive shaft and the bus conductor that is the thing that attached the + block to the - block every one I have sean is black to give you a idea what I am talking about the part number for it is 14072336 per the -34 TM .
AEC Retired
2M35A1
3M35A2
5M105A2
2M1009
1M1008
1M1031

 

[CARNAC]

Is the 1008 driveshaft the same as a 1031? I think so but want to be sure.

Pretty sure I have the block assembly.

 

[Crash_AF]

No, the 208 and 205 rear shafts are different

Later,
Joe

 

[Cucvnut]

just get it rebuilt its the best thing to do i went thru this when i got my M1008 and it was easyer to get a new drive shaft

 

[Bunkerbuilder]

Pics of shaft, and Dimensions ?

IE the shaft on my M1028 (with NP205) has a slip that fits into the rear of the TC.

One of my Civilian trucks has a shaft with a yoke for the U Joint to fit into.

Didn’t know if the NP205's in CUCV's are all the same or not.

 

[Crash_AF]

Yes, the CUCV shafts are all the same with slip yoke. I'd say just take yours to a good driveshaft shop and have them re-tube it.

Later,
Joe

 

[hndrsonj]

That's what he had to do to the last M1008. Gotta luv GL.

 

[oldmechanic]

i have one, $175 shipped
OM

 

[CUCV85]

fire them

That's what he had to do to the last M1008. Gotta luv GL.

Yes, you gotta love them GL employees,
"BENDING DRIVE SHAFTS SINCE 2001"
Question: Has anyone ever heard of a GL Employee
being fired for helping mangle a MV?
It's bad enough 18-25 year olds beat the pess out of them
for 25 years...

 

[niferous]

I guess I got lucky with my M1009. It has the forklift dents in the side but the drive shaft was straight.

 

[CUCV85]

I guess I got lucky with my M1009. It has the forklift dents in the side but the drive shaft was straight.

GL "My drive shaft was good but a huge dent in the door -
I describe it as stoved in
and the rear cap window blown in,
all that was left was the glass gasket
oh wait all the glass was left
INSIDE THE VEHICLE. "

Please Fire GL employees who are or act drunk!

 

[Mudstone]

Yes, you gotta love them GL employees,
"BENDING DRIVE SHAFTS SINCE 2001"
Question: Has anyone ever heard of a GL Employee
being fired for helping mangle a MV?
It's bad enough 18-25 year olds beat the pess out of them
for 25 years...

I am horribly offended by this. I was one of those 19 year olds thought the comment is true..... ok i'm not offended anymore