Deep water fording installation?

[juanprado]

Got the oil dip stick and tube in today.

Soaking the bolt probably helped immensely as I did not have to battle it too bad. Thanks for the tip!

I used a 8mm allen socket bit. I tapped the socket with a hammer to fully seat it all the way and it cooperated.

Now off to the t-dipstick tomorrow and call this project done!

 

[fpchief]

Got the oil dip stick and tube in today.

Soaking the bolt probably helped immensely as I did not have to battle it too bad. Thanks for the tip!

I used a 8mm allen socket bit. I tapped the socket with a hammer to fully seat it all the way and it cooperated.

Now off to the t-dipstick tomorrow and call this project done!

The T dip stick is easy money. One bolt on rear of passenger cylinder head and it is done. Dont forget your o-ring!!! The heat shield is a little cranky though.

Sent from my SM-G930V using Tapatalk