wsucougarx
Well-known member
- 6,951
- 65
- 48
- Location
- Washington State
Hey guys, what do the numbers mean on the engine covers in yellow? Specifically do these numbers look good or bad? Please advise.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
deuce engine marking meanings
- Thread starter wsucougarx
- Start date
- 4,210
- 37
- 0
- Location
- Las Cruces, NM
Looks like cylinder compression numbers to me....but I may be wrong.
- 50
- 3
- 0
- Location
- Drammen, Norway
I think is from injector test with the nozzles in the engine.
If I,m right, then the numbers are good. wherry good.
Odd
If I,m right, then the numbers are good. wherry good.
Odd
AaronW
New member
- 870
- 3
- 0
- Location
- Napavine,WA USA
Similiar #'s on my engine.
Attachments
wsucougarx
Well-known member
- 6,951
- 65
- 48
- Location
- Washington State
Hmm so far it could be compression test or injector pressure.....
AaronW
New member
- 870
- 3
- 0
- Location
- Napavine,WA USA
Did some quick searching. Could these be volume/time(cc/min?)@2000 ERPM? Would I look for this in an IP manual or truck maint manual?
- 9,576
- 210
- 63
- Location
- Dickson,TN
I know the multifuel has higher compression than most diesels but those numbers seem too high to be compression numbers (400-500). I've never heard of compression numbers that high.
wsucougarx
Well-known member
- 6,951
- 65
- 48
- Location
- Washington State
Any motorpool or maintenance guys in here tonight?
wsucougarx
Well-known member
- 6,951
- 65
- 48
- Location
- Washington State
With all the deuces in here, someone has got to know
wsucougarx
Well-known member
- 6,951
- 65
- 48
- Location
- Washington State
- 50
- 3
- 0
- Location
- Drammen, Norway
It's for the fuel, nozzle....trying to find the info....
I did get mine nozzles fixed up to 4600 psi
Odd
I did get mine nozzles fixed up to 4600 psi
Odd