• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce parts on a 5 ton

junkyardog

New member
72
0
0
Location
wakefield new hampshire
i purchased a hard top and a heater from a duece for my 5 ton. i noticed that the starter on the duece was on the passinger side. mine is on the drivers side. both engs are multifuel with turbos. would the starter still work. i didnt buy it but i was going to. also the generators look the same size but mine is more open with a fan in the center of it.
 

Westech

CPL
6,104
210
63
Location
cow farts, Wisconsin
RE: duece parts on a 5 ton

the generators will swap over, just one has a out side fan and the other inside fan. the starter.. I think so you may have to re clock it.
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,010
1,823
113
Location
GA Mountains
RE: duece parts on a 5 ton

Re-clock the nose on the starter and you shoud be OK. The alts have a few different designs but for the most pat are interchangeable.
 

desertfox

Member
Steel Soldiers Supporter
282
9
18
Location
Aztec, NM 87410
RE: duece parts on a 5 ton

The deuce starter will mount on the 5 ton and visa versa. You will need to change the starter drive gear and index the starter nose for it to mount up properly. I have used a 5 ton on a deuce. When I mounted the 5 ton starter on the deuce it was indexed outboard just a tad more that a deuce starter.
 
Top