• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Do I Need a Wheel Dolly?

rneely

Member
163
1
18
Location
Casco, MI
Have a leak on left rear wheel (frt rr axle) and will have to take wheels off to see if it is a wheel cylinder or axle seal problem.
Can I do this by pulling one wheel at a time and then the hub or should I borrow a wheel dolly and take both wheels off at same time with hub?
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,598
1,142
113
Location
Athens, Ga.
I take them off one wheel at a time, but if you have a smooth work surface and a wheel dolly, it's a nice time saving trick.
 

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,287
3,462
113
Location
NORTH (Canada)
If you have a smooth work surface, a pallet jack (pallet cart) works well, too. Take this from the guy who normally has to work in the gravel driveway...
 
Top