• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Easy DIY removable steps for my 5 ton

sed6

New member
238
0
0
Location
OKC, OK
I do a lot of car show plus Cars & Coffee and I hang a sign on my truck inviting parents and kids to climb in and take a pic. Peeps really love it cause most cars at shows are look but don't touch. A comment I've overheard over and over is how hard it is to get in and out. That plus my wife doesn't like the climb either. And truth be told, an extra step sure would help when doing maintenance at home.

I read lots of threads, Googled step solutions for big trucks and explored lots of options before I decided to just fab my own. I had hoped to find something that retracts or even something that flexes but most solutions were either expensive, ugly or not very MVish. So I decided on something that's removable. I leave the steps in place for shows and driving and maintenance, and then quickly remove if I decide to go off road. Hope you like!

Drivers side

20160603_171717.jpg

Driver brackets

20160603_171743.jpg

Passenger side

20160603_171620.jpg

Passenger bracket

20160603_171648.jpg

Held in place with a simple hose clamp

20160603_171852.jpg

Steps and brackets ready to install

20160601_194214.jpg

Just bent up some 3/8" rebar

20160530_104554.jpg

I can't weld but my muffler guy can

20160603_082857.jpg
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks