Exhaust elbow

[Jake0147]

It seems that the mice have chewed a hole in my exhaust pipe... Or something like that.
I need the 45 degree elbow from the turbo outlet. I don't see one online, but I'm sure the big vendors have got them. Before I start calling on Tuesday, does anybody have a good condition one they'd like to part with?

 

[Divemaster920]

Take it off and have a patch welded on it.

 

[Jake0147]

The part that doesn't have a hole in it is so thin that I can stick a ball point pen through it, one spot on top, another on the bottom, and all the way around the outside of the bend. I'm cheap, and I can weld, but I'm not that good..... There's just nothing to save here.

 

[powerhouseduece]

4-M35a2 clean air kits - Steel Soldiers::Military Vehicles Supersite

Might be more bang for your buck! you can replace the whole system if it is rotting out.

 

[gimpyrobb]

Jake, you need just the stainless flex pipe? I got one.

 

[Jake0147]

No, not the flex pipe, the solid 45ish degree elbow between the flex pipe and the turbo outlet.

 

[DieselBob]

I should have a decent take off from my truck. I replaced the hole system because the “J” pipe was toast and I added a muffler. I'll check in the a.m.. only cost would be shipping.

 

[jblack6527]

I had to put one on my truck, I got it from Jatonka. Great guy to deal with, and cheaper than Saturn as well.

 

[Angus1]

If any body can spare one, I also need the same pipe.

 

[poof]

4-M35a2 clean air kits - Steel Soldiers::Military Vehicles Supersite

Might be more bang for your buck! you can replace the whole system if it is rotting out.

Big 10-4
seems like a great deal for the entire set.

 

[bryan70546]

Big 10-4
seems like a great deal for the entire set.

I picked up a set all i needed was the stack , but nothing beats having spare parts