84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
i would never do this normally. it a m1008 rolling shell. thats it. need to get back here and start cutting. should be ok? about 1 1/2 hour ride. thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
flat towing a m1008 with a m1009
- Thread starter 84cucv1ton
- Start date
84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
anyone
- 34,010
- 1,823
- 113
- Location
- GA Mountains
The ten-0-nine with 3.08 gears is no powerhouse. You say shell, does that mean no powerpack? If the powerpack is gone you reduce the weight quite a bit. I'd be inclined to try it just watch your tranny temps. As short as the 09s are, stopping and slowing in turns could wipe you out. Be careful, very careful.
84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
yes there is no power pack
mangus580
New member
- 6,010
- 282
- 0
- Location
- Western NY
Also be careful of how it tracks with no weight on the front axle.....
n1bnc
Member
- 275
- 0
- 16
- Location
- Somersworth, NH
Get a U-haul trailer. Tell them you are putting a honda on it.
hobie237
New member
- 486
- 5
- 0
- Location
- Newark, DE
I'd rather flat tow it than put it on a trailer. That said, I don't think it's advisable, but if you keep your speeds down and don't do any sudden moves, it should be OK. Falls into the "bad idea, but you can make it work" category.
2deuce
Well-known member
- 1,486
- 160
- 63
- Location
- portland, oregon
No hills, no emergency stops. Keep it very slow. But 1 1/2 hour trip at what speed? I'd advise getting a better tow vehicle. I've done it before and never again.
CCATLETT1984
New member
- 3,507
- 8
- 0
- Location
- Saint Clair Shores, MI
I'd agree, try to find another truck to tow with. Don't you know someone with a 3/4ton or 1ton truck?
The biggest thing that is gonna hurt you using the blazer to tow is the short wheelbase.
The biggest thing that is gonna hurt you using the blazer to tow is the short wheelbase.
84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
thanks guys finding another truck now
tsmall07
New member
- 542
- 4
- 0
- Location
- Springfield, VA
From my experience, they won't fit.
BobM
Member
- 593
- 6
- 18
- Location
- Fillmore, Indiana
I flat towed my 1008 644 miles from Md to In and had no problems. But I towed a 3/4 ton chevy pickup without engine/tranny 8 miles and it was a nightmare! Without the engine/tranny in it the pickup wouldn't track worth a darn. Some are easy, some aren't. And it isn't always easy to tell which will be which!
Good luck.
BTW: Even being a nightmare, I made it all right. just be careful!
Good luck.
BTW: Even being a nightmare, I made it all right. just be careful!