• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Flatbed on a 5 ton

Russ Knight

Well-known member
Steel Soldiers Supporter
1,117
1,058
113
Location
Perry, FL
Thinking about building a flatbed for my 5 ton. I need to haul 20' sections of pipe with it and also need it to be 8' wide. I am considering an 18' length. Do you guys think the extra 4' length will lighten the front end too much when loaded? I may haul up to 7-8 thousand pounds of pipe.
 

gimpyrobb

dumpsterlandingfromorbit!
27,787
776
113
Location
Cincy Ohio
It depends on where your trunion for the axles is. If its close to center of the load you may be ok. If its off by feet, I'd say no way.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,158
9,496
113
Location
Mason, TN
No. You will be fine. I have a 16ft LMTV bed sitting in hattiesburg that is a flatbed. Remove your spare tire carrier and itll be flush with the rear of the truck or let it overhang. 7 benji's and its yours.

Sent from my SM-G935P using Tapatalk
 
Top