fuel bleeding

[cubdriver55]

I have a m235a2 and it has been sitting about 4 years. I tried to start it and it was not getting fuel. I think the tank was too low and I ran all the fuel out. I put 10 gals in and the pump is working and returning fuel I bled the screw between the 2 filters and have fuel there. I can not get fuel out the top of the injector pump but have fuel at the pump. Any ideas? Thanks Steve

 

[Welder1]

I would check to make sure the fuel shutoff is not stuck in the off position and moves freely. It should be about 7 oclock position for a run condition. If that is fine then possibly the button came off the hydraulic head.


Eddie

 

[cubdriver55]

Can the plunger be moving freely but still not turning fuel on?