docfarmall
New member
- 1,947
- 26
- 0
Hey Gimp can i bring my crome nutts this year????????
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Fuel polishing
- Thread starter gimpyrobb
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,787
- 779
- 113
- Location
- Cincy Ohio
Doc, I might be working on polishing fuel, and I've gotten good at polishing my knob, but...
I wouldn't touch your nuts with WRECKERMAN'S hands!
I wouldn't touch your nuts with WRECKERMAN'S hands!
stancanpara
Member
- 261
- 2
- 18
- Location
- Montpelier VA
Westex
Member
- 579
- 6
- 18
- Location
- El Paso, TX
Getting down to 'nuts' and bolts again, is there anything wrong with letting stand waste motor oil in the hot sun and then cranking up about 8 inches above the bottom of say, a 55 gallon drum, the waste oil, and pouring it through a HEPA vacuum cleaner bag for filtration into your fuel tank of a multifuel deuce?
I do have a black 200 gal tank that is in the sun. I use it to separate water, and crud, out of the oil. I have a drain on the bottom on the side (it's like a drum on it's side) that I drain water from till I start getting oil, then I draw from 6" above that to filter.
Don't know about the vac bag.
Don't know about the vac bag.