• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Gama Goat Restoration

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,217
2,879
113
Location
Fort Worth, Texas
Got the pulley for the gen and master cylinder today, but I am still waiting on the oil filter adapter to come in so I can fire it up. Any advice before trying to start this thing after it has sat for 30 years?
Have a CO2 fire extinguisher on hand in case it tries to run away.
 

popacom

Member
Steel Soldiers Supporter
564
9
18
Location
winchester,ky
When you can give me a yell...have most
stuff you are probably missing ....My Goat
carrier is originally 792, and I have most of
parts I removed on heater etc.
Also have a couple n.o.s. Amb.
rear covers I think........Bill/popacom @859-
808-0836
 

Jericho

Well-known member
1,179
68
48
Location
Landaff NH
did you get the injectors freed up . adjusting the rack on the Detroit 353 can be a real chore, if you have to pull them and if your not familiar with Detroit rack set up you may want to find and old Detroit mech to set them back up ,if their not nearly spot o
n it wont start, I think I have three new ones some where
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks