• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

gear changing

tankie88

Member
357
4
18
Location
Redruth,Cornwall,England
Last year i had to drop my tranny to put in a new flexplate.Before i dropped it i had all the normal gear changing.Since then it changes up the gears quite fast.When you come to a hill it won't change down by its self i have to manually change down.If i hit the kick down it will change down but change back up after i let my foot off a bit.I've changed the modulater,cleaned out the vac pipes,new filter and oil.Anything else i should do????
 

Brian Thomas

New member
77
1
0
Location
West Jordan Utah.
You need to adjust the modulator with a small screw driver. Pull the hose off and slide the screw driver in the hole and there is a sloted adjusting screw in side. turn it in to make it shift later and out to shift sooner. It dont take much so a little at a time and sevral trys will get it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks