- 7,409
- 2,501
- 113
- Location
- Interlachen Fl.
First of all why do the let someone that does not know what there doing work on the axles.
Thanks to Steve I started digging into the front end. Right side was looking ok but drivers side had fine metallic tint to the oil. Here I found the so called mechanic left out the thrust bearing washer. The cap has some damage and the side gear has some wear plus a good nick in the face. Thrust bearing bad to. New thrust bearing and washer in pic. So I will take the bad cap and cut off the face and use it as the cross retainer to measure the correct gap on the gears. Thanks again Steve 6x6x6.
Thanks to Steve I started digging into the front end. Right side was looking ok but drivers side had fine metallic tint to the oil. Here I found the so called mechanic left out the thrust bearing washer. The cap has some damage and the side gear has some wear plus a good nick in the face. Thrust bearing bad to. New thrust bearing and washer in pic. So I will take the bad cap and cut off the face and use it as the cross retainer to measure the correct gap on the gears. Thanks again Steve 6x6x6.
Attachments
-
79.1 KB Views: 94
-
122.2 KB Views: 85
-
126.1 KB Views: 86
-
76.2 KB Views: 88
Last edited: