bodiman
New member
- 7
- 0
- 0
- Location
- fort smith , Ar
I've been noticing that the gen 2 light is staying on after the vehicle has been running for a minute or two. not being totally knowledgable on 24 volts systems, I wondering if this is normal. when is does go to charge the volt meter goes to green and i can hear a solenoid chunk. I wondering if this is normal or I have to find the problem. i check for voltage at both alts with the key off only alt 1 has 12 volts at the big wire, single post. Can anyone give me some ideas of what to check or look for?