Falstaff
Member
- 43
- 18
- 8
- Location
- Valley Springs, CA
I have several extra H2 wheels with BFG 315's on them, will they work on m1101/2 trailers?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
H2 Wheels on M1101?
- Thread starter Falstaff
- Start date
- 14,592
- 4,628
- 113
- Location
- Buchanan, GA
Bolt pattern should be the same. They're just a little shorter. I'm not sure on the backspacing though. Probably will stick out a little more.
Expendable
Member
- 53
- 1
- 6
- Location
- SoCal
I do not have an M1101/2 but if the hub is similar to a Humvee/H1s then you're going to need to bore out the hole for the hub in the H2 wheels since they are too small.
mf5129
New member
- 120
- 1
- 0
- Location
- mocksville nc
the hole is metric in size.it can be enlarged.you could easily sell those wheels and get stock wheels
harleyhouse
Well-known member
- 1,256
- 29
- 48
- Location
- Oakmont, Pennsylvania
H2 will fit! 8 on 6.5 lug pattern same running gear as a 2500HD
The hub may stick out farther and not be able to use the center caps.
The hub may stick out farther and not be able to use the center caps.