Well, it seems like my heater motor gave up the ghost this morning. Stopped blowing, so I turned it off. Checked it at a gas station the motor is hot but not turning. Is there any way to rebuild one or just get a new one?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Heater motor rebuild for m35a2?
- Thread starter cessnapilot89
- Start date
GopherHill
Well-known member
I'm many cases, lubrication of the bearings will fix you up. Be careful taking the case apart.
Well it spins by hand not with power. When it hit power it sounds like a circuit breaker popping and then resetting after I kill power.
HDN
Well-known member
Heh, I just repaired a sewing machine where that was the problem
@cessnapilot89 did you take the motor out of the truck and test it on the bench? If you want it professionally rebuilt perhaps a shop which works on starter motors, automotive generators, etc. would take a look at it.
I haven't yet, I got it stuck against the oil filters and was figuring out the wiggles to get the motor out when I had to go help the wife. Hopefully Friday I'll have it out entirelyHeh, I just repaired a sewing machine where that was the problem
@cessnapilot89 did you take the motor out of the truck and test it on the bench? If you want it professionally rebuilt perhaps a shop which works on starter motors, automotive generators, etc. would take a look at it.