• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Hello from Maine

n1dp

New member
3
0
1
Location
Columbia Falls, Maine
Thanks to all that have posted. The "thread stealers" are very welcome. Lots of good photos and info. Been pretty busy with a MEP-005a genset. Had some fuel pump problems; found one of the series pumps weak so the day tank would not will enough to keep up. Got it running again on one of the pumps.

Finally drove the M35 with the Mack engine. It has as much power if not more than the M923. Funny shift pattern but not that bad. The M923 has a new control module for the air brake warning horn and lights. Ordered it and two pressure switches just in case. Module fixed it. The symptom was the light and horn coming on intermittently above 60 psi. Stenciling numbers and name on it until we can get it painted red. One of the crew found some nice LED work lights for the rear of the M923 bed and pump area

Replaced a missing tool box on the M35 and will be putting a portable water tank back on it. Eventually we'll put a booster reel on it and a portable trash pump to go along with the PTO pump already on it.

11008462_1618335745074101_2032217904345372840_n.jpg 11071733_1618326591741683_113135679926873977_n.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks