ida34
Well-known member
- 4,120
- 35
- 48
- Location
- Dexter, MI
I noticed that when my hazard flashers are on the back lights alternate and it looks like the bright bulb is not working in any position. Dim light comes on when using the turn signal to the right and when the parking and running lights are on. I have not been able to check to see if the brake lights work OK. The seemed to when I got it but it could have been the dim right side light coming on for the brake light. I checked the bulbs and they looked fine. The connections are right at the light based on the makings on the wires. There is no damage to the light assembly. Has anyone had this happen to them. Is it the signal controller? When it gets warmer I will have to trace the wired from the light to the source to try and pin this down. I was hoping someone hear would have dealt with the same problem and be able to give me the right answer to the problem.
Thanks
Chuck
Thanks
Chuck