• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

HMMWV LED light conversion question.

alphaseventwo

Member
70
10
8
Location
Chesterton Indiana
So I've read a bunch of the old threads on LED lights, which type, wiring issues, troubleshooting, ect. ect. My question now to the Collective Brain Trust (CBT) here is - in summary- it seems to me that if you replace one set (turn signals, or headlights, or such) you must in turn replace ALL of the lights on the hmmwv in order for any of them to work? I'm not opposed to an all-LED truck, I just don't want to waste time and effort picking away at one set of lights at a time without results. Thanks again fellow members, your help is always greatly appreciated.
 

ikoinu

Member
120
21
18
Location
Los Angeles, CA
Same here. Perhaps you are thinking of led turn signals, which blink really fast when installed unless you put a resistor in.
You're fine with led headlights.
 

desmodromic

Member
235
22
18
Location
New York, New York
So I've read a bunch of the old threads on LED lights, which type, wiring issues, troubleshooting, ect. ect. My question now to the Collective Brain Trust (CBT) here is - in summary- it seems to me that if you replace one set (turn signals, or headlights, or such) you must in turn replace ALL of the lights on the hmmwv in order for any of them to work? I'm not opposed to an all-LED truck, I just don't want to waste time and effort picking away at one set of lights at a time without results. Thanks again fellow members, your help is always greatly appreciated.
So, headlights are effectively independent of the rest of the lighting system and have no negative affects when LED replacements are installed. The issues arises when you reduce the draw on by replacing turn signals and other items with LEDs below the draw required for the flasher unit to operate. The simple fix is to update the flasher unit to one that is LED compatible. I have the correct flasher units for cheap, along with the upgraded self canceling turn signal instal kits.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks