• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Identify this bracket?

doghead

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,187
113
Location
NY
It is for a bendix socket, used with the Vic-1. CABLE CX-13089 fits into the bendix socket.
 
A

acetomatoco

New member
2,198
8
0
RE: Re: Bracket

Earliest of trucks had it as std equipment, then it became part of the Radio Installation Kits. Most of the dealers who have radio stuff will have the plug. Of course, it has different pigtail lengths depending on the application...such as in the M38 where the mount is behind the passenger seat and the batteries are in front of the windshield, etc.
 
jonesal

jonesal

Mission Specialist
Steel Soldiers Supporter
414
69
28
Location
Brookings, SD
Boatcarpenter said:
It is to mount a Bendix Connector in to use as a power source for radios, etc.
Click to expand...
Does anyone have a part number for the cable and bendix connector shown above? I've looked in the TMs and 24P and cannot find it. I *even* searched the hell out of the threads. Lots of P/Ns for the VIC-1 setup but not the cable/connector from the bracket to the battery.

And help is appreciated.

Also, anyone who has VIC-1 parts/cables who want to sell them, I'm starting to collect the parts for an install.
 
You must log in or register to reply here.
112,845members
166,344threads
2,342,685posts
1,075online users
Top