SterlingDevelop
New member
- 139
- 5
- 0
- Location
- Parkesburg, Pa
I posted some pics under the trailers forum, but I'll put one here too.
The truck was missing the ignition switch when I got it. (previous owner lost the key), so the first project is to fix that. The "apply red wire to terminal" starting procedure is substandard.
My father is an EE, so we thought "hey, we could overly complicate things and use up hours of valuable time".
We are replacing the ignition switch with a fingerprint identification switch that we scavenged off a surplus biometric access control lockset.
Push in the glow plug switch, fingerprint on the reader, and she'll fire right up.
This is our theory.
I'll post some construction and installation photos, if anyone is interested.
Here's one I took today, when we went to the DRMO to pick up the 105.
It's hooked up to the IFA.
The truck was missing the ignition switch when I got it. (previous owner lost the key), so the first project is to fix that. The "apply red wire to terminal" starting procedure is substandard.
My father is an EE, so we thought "hey, we could overly complicate things and use up hours of valuable time".
We are replacing the ignition switch with a fingerprint identification switch that we scavenged off a surplus biometric access control lockset.
Push in the glow plug switch, fingerprint on the reader, and she'll fire right up.
This is our theory.
I'll post some construction and installation photos, if anyone is interested.
Here's one I took today, when we went to the DRMO to pick up the 105.
It's hooked up to the IFA.
Attachments
-
53 KB Views: 1,213