• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Injector hold down torque

S

Sneaker

New member
102
3
0
Location
OR is home | @ FE Warren AFB, WY for the time bein
Replacing an injector. The LDT 465 assembly manual calls for 150 pounds feet of torque on the two bolts holding the injector hold down ring on. This seems excessive and the bolts coming off did not have anywhere close to this value. Is this correct? What is the reason for so much if so? And others have implied 20 ft/lbs is okay and what they did..

Yes, I have searched and read threads. Have look through the manuals even went looking in Bosch technicals. Just confused...
 
You must log in or register to reply here.
108,967members
164,071threads
2,308,554posts
714online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks