• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Injector Pump

Floridianson

Well-known member
Steel Soldiers Supporter
7,390
2,439
113
Location
Interlachen Fl.
[QUOTE=poorboy where can I get a re-seal kit for the hh and the fdc?
You have to take what you read on the web with a grain of salt. From what I have seen the FDC should be the first place to look at when fuel in the oil is in question.
This is why most all that know say if your FDC is not bypassed then bypass it first thing. Don't worrie about the HH orings for now. After you bypass the FDC the fuel control Oring can be checked with the motor running and the shut down cover off. If fuel is still showing up in the oil then we might look at the IP lift pump seals.These are the three most common I have read or found places to look at.
I sent you a PM with my number.
 
Last edited:

graham

New member
24
0
1
Location
crosby , tx
I finally got some time to work on the truck and got it running again I had to set the pump 1 tooth before the line on the pump. The truck runs good now but I have another problem the transmission when you put it in 4th gear it pushes it back out of gear when you let off the clutch.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks