Injector Testing

[NRGarrott]

Hello,

I removed, cleaned, and replaced the nozzles on all of my injectors last week. I'm having trouble tracking down a shop to test my injectors. Right now a couple of my hard lines running from the IP to the injectors are bent clear of the block to give me room to remove the injectors. Could I leave 7 of the lines not connected and hook 1 up. Then crank the engine over and see if I have fuel flow, and in turn test all 8 injectors this way?

Thanks for your help.

 

[Cucvnut]

if you do tht you will spray fuel all over the place.

 

[NRGarrott]

Thats ok, I can put a old blanket over everything. I was more worried about catastrophic/irreparable damage then a mess.

 

[Cucvnut]

no nothing bad would happen but the pump pushes diesel at 3000 psi i think. so jsut a lot of fuel