• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Installing steering knuckle studs

ekdee1

New member
8
0
0
Location
Tucson, AZ
I'm overhauling the steering knuckles on my Deuce and when I attempted to remove the nuts from the steering arm studs, I pulled studs with the nuts. How to I reinstall the 4 studs in the steering knuckle??

Thanks!
 

IHASFIP

New member
227
0
0
Location
TEXAS
I triple that. I just completely went throught the front end yesterday. New seals, boots, the whole nine yards. Luckily the nuts on mine came right off. You could just screw the whole stud with the nut on it back in when you are ready to reinstall. Done it with manifold studs before.

D
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks