IP Removal?

[Powerstroke94]

Does anyone have a Injection Pump removal write up? I tried searching for one but couldn't find anything.

 

[gimpyrobb]

1-Line up the timing marks on the harmonic balancer.
2-Make sure the the line on the disk is lined up with the tooth at the IP's advance unit. (4 bolt window in front of hydraulic head.)
3-Pull front valve cover and make sure your rocker arm is loose. That means you are on the right stroke.(If not, rotate motor once more)
4-Pull off IP.

 

[Powerstroke94]

Alright thanks. And do you think something is wrong with my IP? Heres the latest post I have on it with 2 videos.

http://www.steelsoldiers.com/deuce/85196-need-some-help-please-5.html

 

[Floridianson]

I watched you vid. Just give me a call. 352-262-0398 soooo much easer that typing. In most cases you don't need to replace the whole IP just the head if that is what is wrong.

 

[kennys@wi.rr.com]

If it's just the IP that can be an easy fix.
http://www.steelsoldiers.com/deuce/69241-removing-rebuilding-reinstalling-hydraulic-head.html

 

[Powerstroke94]

Hey gimpyrobb, Im about to replace the IP on my truck and when you say make sure the rocker arm is loose, which cylinder and rocker arm are you refering to?

 

[gimpyrobb]

Hey gimpyrobb, Im about to replace the IP on my truck and when you say make sure the rocker arm is loose, which cylinder and rocker arm are you refering to?

#1, the one at the "front" of the motor.

 

[Powerstroke94]

Thats what I thought, I just wanted to make sure. Thank you!