• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

It appears I just won a M750

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,123
113
Location
Athens, Ga.
We're making Joe a special nametag for the Ga Rally: "Oven Driver"

:p
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,814
113
Location
GA Mountains
Would look nice as the HQ at the GA Rally. One thing Joe, if you did remove the box for storage, the M36 bed will fit that trailer perfectly. Makes a nice enclosed or open cargo trailer with an additional front porch.
 

Blythewoodjoe

Active member
985
56
28
Location
Blythewood, SC
I should have mentioned earlier, but everything when smooth. The lights even worked (brake lights). The only thing I couldn't figure out was how the brakes worked. I hooked up the lines and activated the brakes to get it hooked up. It was pushing it back until I did that. Then when I got ready to leave, the trailer was locked down tight until I cut off the red light's valve and let the air leak off. I am not sure I had brakes on the trailer for the ride home.

Anyway, lots of possibilities with this set up. I do not plan to keep and maintain a road tractor so I am thinking if I was to move it around I should set the box on a bumper pull trailer so it would be easy to move with a cargo truck. Only time will tell.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks