• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Keeping a M1009 alive

CUCV VZ

Member
30
31
18
Location
Flint, Michigan
Can anyone give me the PNs for the sensor assembly on the driver's side cylinder head? It is the one near the firewall, the connector snapped off.

Also is there a good reference part list diagram for the engine assembly and accessories? I couldn't locate one in the 6.2 TM. Trying to tackle all bad hoses and gasket replacements.

Thanks
 

deank

Well-known member
Steel Soldiers Supporter
414
685
93
Location
Inverness, Florida
TM 9-2320-289-34P
Page 24-1
That sensor is obsolete use this one, it comes with a new connector. On Amazon, picture does not show the sensor, but I just replaced my old one for the same reason with this item.

1759341262285.png



the manual listed above will show you every nut, bolt, part of the entire truck.
 
Top