• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Lets talk winches

57
40
18
Location
BOSTON,MA
I am going to add a winch to the front and back of my humvee.
What is the hot set up?? Looking for modern style with remote and rope cable. Would 12 volt work off the alternator?
 

FlameRed

Well-known member
391
634
93
Location
Florida
There are many threads on here with what folks have done.

The popular ones here are:

  1. The Military winches (hydraulic)
  2. Warn ($$$)
  3. Other 24V "aftermarket" ones
I went with a 24V Sherpa. While the Sherpa did come with a rope, it only had a wire remote. I also hooked up a three way momentary switch so I can operate it from the inside if I need to.

What was kind of expensive was the front winch mount plate, since I could not fab that up myself. A bit of a PITA for me to install the front one since I had to deal with the brush-guard and dealing with the lower control arm bolts was extremely painful. The rear winch mount was the military one and was not as expensive.

Sorry I don't have pictures handy... :shrugs:
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,778
3,878
113
Location
Brooklyn, NY
I have an old Warn winch military edition with all the parts, and I will be putting that on one of my trucks, however I’m honestly considering going with a crappy harbor freight 12,000 pound winch front and back on one of my ECV‘s just to check it out.

I am aware that you get what you pay for, but I am very curious. Given that I have been reading a lot of negative feedback regarding Sherpa winches recently, and given that they may not be shipping to the United States right now anyway, I figure I only have 600 bucks apiece to lose.

Not sure if I will pay a price for this or not regarding malfunction or nonfunction, but I’m willing to be the guinea pig
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,349
10,313
113
Location
Papalote, TX
I would not run a 12V winch, that would load the regulator well beyond its ratings.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,349
10,313
113
Location
Papalote, TX
My ECV has dual voltage my friend.

Not sure about your DuraVee.
I was speaking in general terms, most folks have a dual voltage 200A system, I would NOT install a 12V winch on one of those vehicles and certainly not on a 60A single voltage system.
The cost of a replacement regulator would pay the difference in cost of a 24V winch over a 12V, several times.
 

sail78385

Active member
129
129
38
Location
Charleston SC
I have the mile marker front winch plate on my m1123. From what I can tell the M8000 or 9.5RC would package well. I have a 10K Zeon here I might try and stuff in there. We will see....
 

m38inmaine

Well-known member
Steel Soldiers Supporter
2,142
99
48
Location
Maine USA
On my M1097A1 I installed a Mile Marker 24V, purchased the frame extensions and a used front plate, I went with the 9.5K. If you call Mile Marker they will build you a 24V version, it was $75 extra and I had it within a week. With the frame extensions there was plenty of room up front.
 

country

Well-known member
Supporting Vendor
1,395
392
83
Location
Feasterville, Pennsylvania
I am going to add a winch to the front and back of my humvee.
What is the hot set up?? Looking for modern style with remote and rope cable. Would 12 volt work off the alternator?

some oem examples


HM-1511 | HM-1511 HMMWV Front Winch (11).jpg
HM-1511 | Mile Marker Hydraulic Front Winch 10,500 Lb. Capacity HMMWV
Mile Marker Hydraulic Front Winch 10,500 Lb. Capacity HMMWV
NSN #: 2590-01-456-7879
Part #: 57K3541
Price: $375.00


COM-3233 | 18000lbwinch-5.jpg
COM-3233 | 18,000 lb. 24 Volt Electric Warn Severe Duty Winch Complete
18,000 lb. 24 Volt Electric Warn Winch Complete with fair lead, wire rope tensioner and controller
NSN #: 3950-01-610-7413
Part #: 72005
Price: $4,100.00


HM-536 | 2540-01-361-8206 Bumper, Vehicular, Front Winch Mount Bumper (1).JPG
HM-536 | Front Winch Bumper Plate HMMWV
Front Winch Bumper Plate HMMWV Truck Variants
NSN #: 2540-01-361-8206
Part #: 12342395
Price: $189.00


HM-1455 | HM-1455 Front Winch Bumper  (3).jpg
HM-1455 | Front Winch Bumper Plate HMMWV
Front Winch Bumper Plate HMMWV HMMWV 1 1/4 Ton Military Trucks
NSN #: 2540-01-412-8610
Part #: 12447091 2540PL0781912
Price: $215.00


HM-3717 | HM-3717  Hydraulic Winch Hose Assembly Mile Marker HMMWV (5).JPG
HM-3717 | Hydraulic Hose Assembly Rear Long Hose Mile Marker Front Winch HMMWV
Hydraulic Hose Assembly Rear Long Hose Mile Marker Front Winch HMMWV
NSN #: 4720-01-475-4641
Part #: 983-88-00C47, 4720PL0840224
Price: Call for details


HM-3718 | HM-3718 Front Short Hydraulic Hose Assembly Mile Marker Winch HMMWV (6).JPG
HM-3718 | Hydraulic Hose Assembly Front Short Hose Mile Marker Front Winch HMMWV
Hydraulic Hose Assembly Front Short Hose Mile Marker Front Winch HMMWV
NSN #: 4720-01-475-3757
Part #: 983-88-00C36, D-983-88-00C36, 4720PL0840204
Price: Call for details


SP-1842 | SP-1842  34 Inch Towing Chain with 56 Links, 2 Small Loops and 1 Hook (2).JPG
SP-1842 | 3/4" Inch Towing Winch Chain with 59 Links
3/4" Inch Towing Chain with 59 Links, 2 Small Loops and 1 Hook. Overall length is 140 inches
NSN #:
Price: $49.00


COM-5957 | 3 Quarter Spool (1).JPG
COM-5957 | Wire Rope Winch Cable 3/4 Inch Diameter .75 Inch Spool with Thimble Clevis
Wire Rope Winch Cable 3/4 Inch Diameter .75 Inch Spool with Thimble Clevis
NSN #:
Price: $295.00






HM-3830 | Front Winch Frame (7).JPG
HM-3830 | Frame Cut Front Section HMMWV
Frame Cut Front Section HMMWV
NSN #:
Price: Call for details


SP-2822 | Capture1.JPG
HM-3824 | Winch Hydraulic Front Mounted Mile-Marker HMMWV
Winch Hydraulic Front Mounted Mile-Marker HMMWV
NSN #:
Part #: 9S000560-F
Price: $299.00


HM-3698 | HM-3698 Front Hydraulic Winch Control HMMWV (6).JPG
HM-3698 | Directional Controller Front Hydraulic Winch HMMWV
Controller Front Hydraulic Winch HMMWV
NSN #: 6150-01-475-8835
Part #: 6150PL0839823, 983-74-1001
Price: $149.00


SP-2821 | IMG_20200119_170807 (Large).jpg
HM-1540 | Winch Warn Series 12 Electric Winch 24 Volt HMMWV
Warn 12,000 lb 24 Volt Electric Winch For HMMWV Military Truck
NSN #: 2590-01-494-3532
Part #: 12480535
Price: $425.00


SP-2984 | SP-2984 Warn Series 12 Hydraulic Winch 24 Volt Electric with Brackets (7).JPG
HM-3825 | Warn Series 12 Winch 24 Volt Electric with Extension Brackets
Warn Series 12 Winch 24 Volt Electric with Brackets
NSN #:
Price: $1,900.00


HM-474 | HM-474 Left Front Extension Bumper Bracket HMMWV (12).JPG
HM-474 | Left Front Extension Bumper Bracket Winch HMMWV
Left Front Extension Bumper Bracket HMMWV
NSN #: 2510-01-358-1178
Part #: 12342387
Price: Call for details


HM-1071 | HM-1071 Right Front Extension Bumper Bracket HMMWV (7).JPG
HM-1071 | Right Front Extension Bumper Bracket Winch HMMWV
Right Front Extension Bumper Bracket HMMWV
NSN #: 2510-01-357-8789
Part #: 12342388
Price: Call for details


HM-7578 | USETHIS2.JPG
HM-7578 | Winch Front Mounting Plate Electric Front Winch Cable Plate with Brackets and Shackles HMMWV
Electric Front Winch Cable Plate with Brackets and Shackles HMMWV
NSN #:
Price: $425.00


HM-3779 | 9000 lb.   24 V Warn electric winch with brackets and bumper 5.jpg
HM-3779 | Winch 9,000 LB 24 Volt Rear Warn Electric Winch with Brackets and Bumper HMMWV
Winch 9,000 LB 24V Rear Warn Electric Winch with Brackets and Bumper HMMWV
NSN #:
Price: $8,900.00
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks