Light/Horn issues on new to me M925A2

[oliver28732]

Having the below issues with my M925A2. I removed the multi-switch and tested per "Lights Switch Rebuild" by Brian Sikkema (great guide!). The multi-switch is 100%. Appreciate any advice given.

Headlight (top) switch	Panel switch	Result
OFF	OFF	NOTHING
OFF	PARK	NOTHING
OFF	PANEL DIM	PANEL DIM AND WORKS
OFF	PANEL BRIGHT	PANEL BRIGHTER AND WORKS
B.O. MARKER	OFF	(4) RED TAIL BO LIGHTS LIGHT ARE ON LEFT AND RIGHT, (2) WHITE FRONT BO LIGHTS ON LEFT AND RIGHT, READ BO LIGHTS NOT ON
B.O. DRIVE	OFF	(4) RED TAIL BO LIGHTS LIGHT ARE ON LEFT AND RIGHT, (2) WHITE FRONT BO LIGHTS ON LEFT AND RIGHT, READ BO LIGHTS NOT ON
STOP LIGHT	OFF	NOTHING
SER. DRIVE	OFF	(6) SIDE LIGHTS ON, DRIVER SIDE SIGNAL LIGHTS ON, RIGHT SIDE SIGNAL LIGHTS OFF, HEADLIGHTS OFF, HIGH BEAM INDICATOR WORKS
LEFT TURN SIGNAL		FRONT AND REAR LEFT SIGNAL LIGHTS BLINK
RIGHT TURN SIGNAL		FRONT AND REAR RIGHT SIGNAL LIGHTS BLINK
HAZARD ON		FRONT AND REAR BOTH SIDE SIGNAL LIGHTS BLINK
HORN DOES NOT WORK

 

[juanprado]

Horn is totally separate. Button in stg wheel, box at base of column, solenoid on horn. Check wires first would be my advise.