Little rubber insert on throttle/ip cable end

FMJ

In Memorial
In Memorial
4,215
37
0
Location
Las Cruces, NM
Does anyone have a source for the rubber/steel piece that goes in the throttle linkage that connects to the IP?
 

Crash_AF

Active member
1,536
4
38
Location
Colorado Springs, CO
I'd be interested in a source (besides generous other members) as well. I have two throttle cables that the grommet is dead in, and the one on my 1031 looks like it's about ready to fall apart.

Joe
 

Sharecropper

Well-known member
Steel Soldiers Supporter
1,633
495
83
Location
Paris KY
The grommets are available from McMaster Carr, item #9600K31 "Push-in Grommet, 5/16" ID, 5/8" OD, 1/16" Thickness for 1/2" Diameter Panel Hole, packs of 100". $6.89 for 100.

Probably have to salvage the little steel piece from a parts truck.

Hope this helps.
 

FMJ

In Memorial
In Memorial
4,215
37
0
Location
Las Cruces, NM
The grommets are available from McMaster Carr, item #9600K31 "Push-in Grommet, 5/16" ID, 5/8" OD, 1/16" Thickness for 1/2" Diameter Panel Hole, packs of 100". $6.89 for 100.

Probably have to salvage the little steel piece from a parts truck.

Hope this helps.

Thanks!
 

85CUCVtom

Member
Steel Soldiers Supporter
724
22
18
Location
Lakewood, Ohio
I found the grommets at Sears hardware. They were in the hardware isle in the plastic bin. I bought a few just to have them. If you can't find one PM me and ilk see if I can send you one.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks