jdknech
Active member
- 1,095
- 7
- 38
- Location
- Jeffersonville, Indiana
looking for a hemtt cab for a project, any ideas where i can find one, and how much $$$ i'm looking at?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
looking for a hemtt cab, any ideas?
- Thread starter jdknech
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,787
- 778
- 113
- Location
- Cincy Ohio
GL.
jdknech
Active member
- 1,095
- 7
- 38
- Location
- Jeffersonville, Indiana
on GL they are selling 8 at a time, i only need 1(can only afford 1 lol)
jdknech
Active member
- 1,095
- 7
- 38
- Location
- Jeffersonville, Indiana
and GL wants them "[FONT=Verdana,Arial,Helvetica]mutilated" 
[/FONT]
[/FONT]
papercu
Active member
- 2,930
- 33
- 38
- Location
- Baxley, Ga.
I have one but it is in South Ga. 200.00 (or trades) where it sets. Wayne
jdknech
Active member
- 1,095
- 7
- 38
- Location
- Jeffersonville, Indiana
really?? what kind of shape is it in?(just asking, not getting picky.. lol)
bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
White Owl Parts Co., Ranchers Supply, and GL has them in lots of 1 at the time and they dont have to be cut up. Just watch for the singles. - Jay
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
If you can't make a deal with Wayne send me a PM...I have a source but they will not be cheaper. They are very complete....not stripped to the the bare cab like some I have seen.
papercu
Active member
- 2,930
- 33
- 38
- Location
- Baxley, Ga.
make a deal with him, mine is stripped and I'm in no hurry to sell. Wayne
exbrown
Member
- 548
- 13
- 18
- Location
- West Union, SC
I called and asked if cutting it in half would qualify as mutilated, and was told that it would.and GL wants them "[FONT=Verdana,Arial,Helvetica]mutilated"
I had considered buying some to use on some projects, but decided that it would be too much trouble, and no assurance that what I was told would suffice.
- 756
- 4
- 18
- Location
- C.G. JMTC MICHIGAN
The cab is just built out .120 wall X square tubing coved with sheet 16 GA sheet metal.
I use to repair them along with het's same build platform.
I use to repair them along with het's same build platform.
drdstny
Banned
- 187
- 6
- 0
- Location
- Portsmouth, NH
I have two. Complete. I posted earlier today in classifieds, but apparently you missed it.
Talk to me.
Talk to me.
jdknech
Active member
- 1,095
- 7
- 38
- Location
- Jeffersonville, Indiana
i looked through the classifieds, and came up dry, but that could just be me also..
Ruppster
Member of questionable origins
- 608
- 14
- 18
- Location
- Lakeland, Florida
Don't the ads have to be approved first? If so they may have been submitted for the classifieds section but not approved yet.
Ruppster
Ruppster
jdknech
Active member
- 1,095
- 7
- 38
- Location
- Jeffersonville, Indiana
i found the ad, pm sent...
earnie
Member
- 171
- 0
- 16
- Location
- seattle ,washington,usa
do you still have them pm me please with the info
drdstny
Banned
- 187
- 6
- 0
- Location
- Portsmouth, NH
Detailed post in mere minutes so as to comply with Classifieds Forum rules. PM me if you don't have them by tonight.