Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
I have the NSN# 4930-01-208-6400 It is for the Shop Equipment, General Purpose Truck Mounted. If anyone has the TM, PLEASE get back to me.
Thanks
Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Looking for TM for M1031
- Thread starter Staffsargent
- Start date
citizensoldier
Active member
- 3,981
- 16
- 38
- Location
- Northern Michigan. Smelt City
Recovery4x4 has the scoop on this.. I believe its still classified for some reason...
Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
Do you have just the TM #
- 34,014
- 1,814
- 113
- Location
- GA Mountains
Not approved for public release yet.
Crash_AF
Active member
- 1,530
- 7
- 38
- Location
- Colorado Springs, CO
The TM number is 9-4940-562-13 and -23P
They are still Distribution C
Later,
Joe
They are still Distribution C
Later,
Joe
CCATLETT1984
New member
- 3,507
- 5
- 0
- Location
- Saint Clair Shores, MI
One of us should file a freedom of information request for it.Recovry4x4 said:
Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
Thanks for all your support
truck0590
New member
- 132
- 0
- 0
- Location
- Manassas, VA
Unless there are others that cover this I'm pretty sure it is TM 9-4940-421-14 & TM 9-4940-421-24p. I've seen these and they cover the equipment in the shop truck. I haven't seen the others listed. But like the others said, the ones I listed haven't been released yet.
Truck
Truck
TM 9-4940-421-14 & 14P are for NSN 4940-01-016-2262. That's the Southwest SECM box used on the M1028 and M1028a1's. It's available on www.tpub.com/content/shopequipment.
- 34,014
- 1,814
- 113
- Location
- GA Mountains
These cover the contact maintenance body used on the M887 Dodge. They are in the TM library here.truck0590 said:
Kenny, Ref your ouote, I think you mean TM 9-2320-289-10, 20 & 34 for the CUCV. I do not see an updated manual for the M887 SECM box on the M1028 (which is what I have), is there one?
The manuals I was referring to were originally for the Dodge but it addresses the SECM box (NSN 4940-01-016-2262) only.
The manuals I was referring to were originally for the Dodge but it addresses the SECM box (NSN 4940-01-016-2262) only.
LibertyDeuce
Member
- 159
- 0
- 16
- Location
- New York, NY
TM for M1031
319 is correct. The TM's he lists are for the M1031.319 said:
LibertyDeuce
Member
- 159
- 0
- 16
- Location
- New York, NY
RE: TM for M1031
StaffSargent
The magic number for the TM is: TM 9-2320-289-10. It's in the "Resources" Section with the Technical Manuals. The TM's for repairs are there as well.
PM sent
StaffSargent
The magic number for the TM is: TM 9-2320-289-10. It's in the "Resources" Section with the Technical Manuals. The TM's for repairs are there as well.
PM sent
Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
I found TM9-4940-421-24P. It is for the box and all the goodies that go in it. Now I have to look for the non parts TM.
- 34,014
- 1,814
- 113
- Location
- GA Mountains
TM 9-4940-421-14 and TM 9-4940-421-24P are for the Shop Set Contact Maintenance bodies originally installed on the M887s. The Gov't did take many of these and retro fit them to M1008 and M1028 trucks. They have a self contained gasoline powered welder and a lid above it that opens. You will notice that the floor in one of the front boxes had to be modified to clear the CUCV fuel tank. These TMs are not for the M1031. The 562 manuals are for the shop sets on the M1031. John, the 421-14 and 421-24P are both in the TM section under the resource tab at the top.