• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

looking to buy this truck

Bob H

Well-known member
Steel Soldiers Supporter
3,140
155
63
Location
Huron National Forest, Michigan USA
Not an M880 series truck.

'72 or '73 and RARE!
the two other ones I know of have a Dana70 front axle and a dana 60 rear.

An SS member (odjeeper) here in Michigan has one of those.
 
Last edited:

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,814
113
Location
GA Mountains
I was gonna say the same, looks like a contract truck purchased by the GSA or CD at the time. Almost every CD ambulance and rescue truck has the PTO winch. My 4x4 62 GMC Panel even had one!
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,124
113
Location
Athens, Ga.
That is very cool and it definitely isn't a '67.

I have never seen one of these with a 4speed. I assume it's an NP435?
 

LanceRobson

Well-known member
1,638
206
63
Location
Pinnacle, Stokes County, NC
For the 77-if you are trying to track down the no spark issue, check the continuity of the ballast resistor (the ceramic thingy on the firewall in front of the driver) they rot or burn out and that equals no spark.

Either that ambulance is not GI or it has been monkeyed with a bunch.

Lance
 

AllenEM

New member
270
0
0
Location
Allen, Oklahoma
well I went and looked at it friday it is a 73 and it has manual locking hubs, electronic module for the distributor. single barrel carb.
 

KILBILY

New member
11
0
0
Location
Mt.Gilead OH.
I notice that you have an M880 with a trailer for a bed dc3coyote.Do you have any pictures of it?Im thinking of doing something like this and would like to see what one looks like finished.
 
Top