• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Lug nuts (and how to bust your own)

joshuaz223

New member
141
2
0
Location
Central Square, N.Y.
i have this ratchet head with a 44" handle from my days working on heavy equipment. i have put over 10 ft of pipe on this thing and in 20 +years never hurt it. now for the down side. i have more money in it and the sockets than in my deuce.
 

Attachments

stampy

Active member
1,321
22
38
Location
Henderson. NC
Also, remember that lug nuts are reverse threaded on the "drivers side" of the truck or trailer.... EVEN someone who has a deuce for a LONG time may not know this ( I didn't)....Experience is a BIT<H....(or a long and costly recovery)
 

Clay James

Member
524
4
18
Location
Reno/NV
I use the breaker bar that came with my truck and just put it on the lug nut and jump on it and that breaks it loose every time. I install them again the same way:-D
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks