double eagle
New member
- 2
- 0
- 0
- Location
- marionville, mo
Can somebody tell me wre to locate the trans pressure switch on the cat 7155 trans
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M 920 7155 trans
- Thread starter double eagle
- Start date
wreckerman893
Possum Connoisseur
- 15,647
- 2,141
- 113
- Location
- Akenback acres near Gadsden, AL
Rracing is our resident expert on the CAT tranny.
Do a search for his posts.
Do a search for his posts.
R Racing
Active member
- 2,767
- 16
- 38
- Location
- St. Leonard, MD
Which Pressure switch are you talking about ? There is 1 in the front bottom, And 2 in the manifold.
double eagle
New member
- 2
- 0
- 0
- Location
- marionville, mo
the pressure switch that the engine retarder wiring goes thur
R Racing
Active member
- 2,767
- 16
- 38
- Location
- St. Leonard, MD
If you lift your floor plate to get to the trans manifold. Then look to the rear of the manifold. its in a 1/4 " pipe port about 2 1/2 inches from the bottom and about 3/4 " from the back edge. Its below and right of the clutch regulator. I can post a picture if need be.